Home > Products > Tech Info > NCE Corp Products > Decoders

 

NCE Corp Decoders

Buy NCE Corp. Products Here | Buy NCE Decoders
Download in PDF Format

NAVO
drop in decoder for N-Scale Atlas VO-1000 locomotive

NMP
drop in decoder for N-Scale Atlas MP15DC locomotive

BACH-DSL
an exact replacement for the decoder in the following Bachmann "DCC equipped" locomotives: GP30, GP35, GP38-2, SD40-2, GP40, GP50, FT-A, FT-B and other non-spectrum series locomotives. 

Improvements are:

Silent running - get rid of that loud motor buzz from the Bachmann decoder
Golden white LEDs included (instead of the Bachmann orange LEDs)
128 Speed mode (Bachmann only operates in 14 or 28 speed modes)
Torque compensation for smooth low speed
True advanced consist compatibility
Extra lighting functions for MARS, beacons, strobes, Ditch lights etc.
All lighting outputs have resistors already installed for LEDs

Z14SR
Tiny, generic Z/N-Sized decoder, 1 Amp. 4 function, .57 x .34 x .125", 4 inch wire harness

Z14SRP
Z14SR with 8 pin NMRA plug

N12A0
N, PnP, for Atlas 4 axle, 2 functions.

N12A0e
Same as N12A0 for Intermountain Tunnel Motor.

N12A1
N, PnP, for Atlas 6 axle, 2 functions.

N12SR
The N12SR is about 3/8W x 5/8L x 1/8H, rated for 1 Amp, has 2 Special Effect functions and Silent Running.

N12SRp
The N12SR with NMRA plug.

N14IP
An integrated NMRA plug style decoder rated for 1.3 Amps. Dimensions 1.0"L X 0.38"W X 0.13"H. Integrated NMRA plug eliminates the conventional wiring harness. Features silent running, four function outputs, special lighting effects and the advanced EPF format.

N14SR
Same as the N14IP except this is a generic format with a wire harness.

N14SRP
Same as the N14SR except this has the NMRA plug attached to the decoder harness.

D13SR
EPF decoder, silent run, special effects, 3 functions, 1.3 Amp continuos, 2.0 Amps peak, Size: .67" x .13" x 1.6".
more info available here

D13SRJ
HO 4 function generic decoder with NMRA/JST 9pin plug. Also a direct plug in to Athearn locos equipped with DCC "Quick Plug" such as GP60M and MIkado.

D13SRp
NMRA plug version of D13SR. Not eligible for 10-piece Mix and Match discount.

D14SRP
HO sized 1.3 Amp Silent Running decoder; Direct plug in to most locos with 8 pin socket; Small - .90" x .63" with centered 9 pin plug

D15SR
HO sized 1.3 Amp Silent Running decoder. Short - 1.10" x .63" x .325 with 9 pin plug, 5 EFX (extended effects) lighting outputs.
more info available here

D15SRP
As D15SR with NMRA 2x4 DCC plug.

DASR
.66W x 2.85L x .12H, "plug n'play" format for Atlas/Kato installations, similar to System One DH-104 & Digitrax DH150 series. Silent run, special effects, 4 functions.

NIMFT-A
PnP decoder for the Intermountain FT's. Rated for 1 Amp, has 2 Special Effects Functions and Silent Running.

NIMFT-B
PnP decoder for the Intermountain FT's. Rated for 1 Amp, has 2 Special Effects Functions and Silent Running.

D408SR
O scale and large scale 4 Amp (8 Amp peak) decoder, 8 function outputs, Size: 2.25" x 1.20" x .35", thermally protected. Silent running, special effects.

D808SR
large scale high amperage decoder has been specifically designed to operate in the high-power environment required by some of the USA Trains modern diesels. Stall current is 30A, 8A continuous.

Snap-It
The Snap-It, intended for twin coil switch machines, features a single output and will be available in several weeks.

Switch-Kat
Used for Kato Turnout Motors, features a single output.

Tech Info
AHD
Athearn
Broadway Ltd
Circuitron
CMX Products
DCC Specialties
Digitrax
Generic / Other
Lenz
Miniatronics
MRC
NCE Corporation
Pricom Design
Soundtraxx
TDP Associates